1. Silicone wire is very fragile, frequent bending or cutting line press wheel is too tight, the use of quality leads to cracking and poor pressure resistance; With glass fiber braided wire, the hard press wheel is easy and easy to wear the tool, The sharpness of the peeling knife has higher requirements.
2. The surface gloss of irradiation XLPE line is not enough, and the surface is easy to appear scratches.
3. Single conductor should not be used for excessive adhesion requirements.
4. The inside diameter tolerance of the casing should not be too small.
5. The same wire gauge, the more the more soft, but the copper wire processing cost will be high.
